Home / Products / Electrical & Controls / Cables, Wires & Cord Ends / STAHL electric wire rope hoist replaces AS 3016-17 4/1 L2

Technical Overview

Verified OEM industrial spare part catalogued for petrochemical & MRO procurement.

Manufacturer: STAHL Crane Systems
Category: Electrical & Controls
Sub-Category: Cables, Wires & Cord Ends
Part Number: PN-4583
Model Number: MN-4583
Guaranteed Genuine OEM Industrial Part

STAHL electric wire rope hoist replaces AS 3016-17 4/1 L2

Part Number PN-4583
Model Number MN-4583
Category Electrical & Controls
Sub-Category Cables, Wires & Cord Ends

Product Specification

Manufactured according to the necessary content from the Product Safety Act (Machinery Directive 2006/42/EC, Low Voltage Directive 2014/35/EU), product-related EN standards and the Accident Prevention...
Availability Status: In Stock (10 available)

Detailed Specifications & Description

Manufactured according to the necessary content from the Product Safety Act (Machinery Directive 2006/42/EC, Low Voltage Directive 2014/35/EU), product-related EN standards and the Accident Prevention Regulations (BGV). Hoist drive class acc. DIN EN 13001-2: HD1 Classification gear mech.(FEM/ISO): M4 Classification lifting elem.(FEM/ISO): M4 Mode of protection EN 60529: IP55 Operation outdoor with cover plates, Ambient temperature -20 to +50°C Hoist S.W.L. 3200kg Height of lift 11,50 (max.12,00) m Hoisting speed 1,60 / 9,60 m/min Output (is) 0,90 / 5,40kW Design data, see Product Information / Motor Data Sheet Duty cycle 20 / 40% Trolley Electric trolley short head room Travel speed 6,3 / 25,0 m/min Duty cycle 20 / 40 % Flange width 300 mm Please confirm flange width when ordering. Wind in-service 9,4 m/s Wind out-of-service 24,0 m/s Electric Contactor control (without transformer and crane switch contactor), fully installed in panel box Supply voltage 460 V Control voltage 120 V System frequency 60 Hz With emergency limit switch for top and bottom hook position and operational hoist limit switch and changeover fast slow in top hook position. Overload cut-off SLE3 with analogue load sensor at rope anchorage. Paint (Special paint) Top coat hoist polyurethane or SP-Powder 160 ìm Top coat in colour RAL 7021, Grey-black Top coat hoist cover, panel box, (counter-weight) in colour RAL 6018, Yellow-green The product described above is a partly completed machine as defined by the machinery directive 2006/42/EC. It may not be commissioned until the final machinery into which it is to be incorporated has been declared in conformity with the provisions of the machinery directive. Equipment- Cover mounted over hoist and travel motor (galvanised)- UV-resistant cables and cable glands- Special cross travel drive according to wind load- Inspection certificate EN 10204, 3.1- load hook- Inspection certificate EN 10204, 3.1- wire rope- Motor Routine Test: Report

Related Products in Category

panduit

cable tie

P#: MLTFC2S-CP316
AJ KOELLEMANN GMBH

SEAL,RING

P#: 208495-12
FIAMM SPA

BATTERY

P#: SD11
DEEP SEA ELECTRONICS

AUTO START CONTROLLER

P#: 7310-01